EverStrongT ES10 ZERO VOC is a high-performance industrial strength solvent based contact adhesive formulated with zero VOCs to exceed CA and OTC state regulations. Water resistant and temperature resistant to over 200°F, ES10 is designed for bonding a wide range of substrates to include decorative laminates and veneers, fiberglass, glass, upholstery, fabrics, foam, auto headliners, cork and particle board.
(See Details Below)
*Does Not Qualify for Free Shipping – 1x $35 Hazardous Shipping Charge Per Cart if One or More Items Qualifying as Hazardous Material Ordered
EverStrongTM ES10 ZERO is designed to be applied to both surfaces about to be joined. Spray an even coat of adhesive with at least 80% to 100% coverage of each surface. Allow to dry 3-5 minutes til tacky. Place the surfaces together and apply pres- sure evenly across the full bonding surface. For best results: Make sure that the surfaces are dry and free from dirt, grease or oil. Ensure that the adhesives and substrates are at 60°F or higher. If surfaces are porous, a second coat is recommended after the first has dried and become tacky.
After use, do not close the valve. Leave the gun and hose connected to the canister. Recommended to store canister off the floor if temperatures below 60°F.
Disclaimer of Warranty
NewStar Adhesives Inc. expressly disclaims all warranties either expressed or implied, including but not limited to merchantability, fitness for particular purpose. User is responsible for determining this product is fit for specific purpose and application method and assumes all risk and liability herewith. Manufacturer liability is limited to replacement of product or reimbursement of purchase cost. This provision relates to all sales and cannot be modified.