Safety & Personal Protection
$599.07
Evercoat Finish Sand 4:1 Hybrid Polyester Primer Surfacer is a hybrid polyester primer surfacer that utilizes patented
technology to provide a smooth, low-texture finish. It is ideal for holding down troublesome repairs on a variety of substrates. Finish Sand 4:1 passes 500 hours in salt spray test (ASTM B117) and can be applied over properly sanded and cleaned bare metal. It is compatible with waterborne paint systems and VOC compliant.
Must be catalyzed with 733 4:1 Polyester Primer Catalyst or 734 Fast 4:1 Polyester Primer Catalyst only!
More Information Below
Evercoat Finish Sand 4:1 Hybrid Polyester Primer Surfacer is a hybrid polyester primer surfacer that utilizes patented
technology to provide a smooth, low-texture finish. It is ideal for holding down troublesome repairs on a variety of substrates. Finish Sand 4:1 passes 500 hours in salt spray test (ASTM B117) and can be applied over properly sanded and cleaned bare metal. It is compatible with waterborne paint systems and VOC compliant.
Must be catalyzed with 733 4:1 Polyester Primer Catalyst or 734 Fast 4:1 Polyester Primer Catalyst only!
APPROVED SUBSTRATES
Note: NOTE: An epoxy pre-coat is NOT required for Evercoat 4:1 polyester primers if a minimum of 2 coats are applied to achieve proper protection.
Caution: Do not apply over self-etch primers, acidic coatings, or after the use of acidic prep wipes as these materials can inhibit the curing process of polyester primers.
See Technical Data Sheet for more information.
SDS
